环太平洋：暴风赤红 B级
- 影视游戏
- 2024
- 698
K盒子
10311
- 2024-09
- 零件数 698 pcs
- 包装尺寸 48x32x7 cm
- 成品 19x25x26 cm
K-Box is a brand I didn‘t actually intend to try. However, after finding their releases of the Pacific Rim mechas, I decided to give it a go. I already have 3 Pacific Rim themed mechas from Sluban, so I thought that one more Jaeger can fit in just fine.
I chose Crimson Typhoon (10311) from 2024 release because I liked its unusual shaped legs and 3 arms. I actually like mechas with some unusual details, i.e. not standard looking (too bad I didn’t know about their 2026 release, I’d buy Cherno Alpha then!).
Ordered at AE ATONG BUILDING BLOCKS Store for 17.15 EU (sale coupon), 13 days to the EU. It suppose to have 698 pieces, but I guess they also counted all the spares (and there are many, see pictures). I wouldn’t recommend the store though – they squeezed in the instructions to the package in a really barbaric way. On the other hand, the instructions are really oversized, so I kinda understand them.
Relaxed building took about 3.5 hours. The building process was quite unusual for me, where you build separate modules – small or big ones – and then attach them to the main construction. I liked it though.
Brick quality: pieces seemed lighter than from Lego or other, even cheaper brands. The red colour is painted over usual pieces. The painting is thin, which prevents it from affecting the clutch but also makes less resistant – you can see original colours here and there on the corners and edges. Nothing too visible, though. Paint doesn’t leave any traces on your fingers. The clutch power is good enough, on the verge of being loose. One piece was malformed and another one (black plate 2*4) was missing – I took analogues from my spares. The pieces that are not painted are less glossy than Lego, but not still not completely matte. Technic pieces and small ball-joints are a bit too loose. 6/10 and though not terrible, the pieces do leave an impression of some lower quality products, mainly because of that “light” feeling.
Design: mainly a display piece. Weirdly enough, it doesn’t fall apart when “wooshing” around, despite it looks like some pieces definitely should fall off :D Some decorations are not enforced by anything. Right arms uses small ball-joints, bad decision, as they are too heavy, so you can’t take advantage of 3 arms for cool poses. Posing is also limited by the legs construction. Many limiters are used for stability that will fall off if you try moving them too much. Ball joints (the big ones) are too tight to move, which of course good for stability, but bad for posing considering the aforementioned limiters. The end model still looks great and they even included 2 heads for you to choose from – one moulded and one for you to assemble. I chose the assembled one just because it uses the same pieces and thus its colour is perfectly accurate. Also, I am not sure if I like the freely rotating torso. 7/10.
Stickers/prints: just 10 stickers that should be a win in my book, but no. Most of them are meant to be applied on several pieces. I didn’t even use 2 of them on the legs, as they are not adding much visually but are applied across 4 pieces each. Stickers are transparent and glossy, which doesn’t look good on a painted surface that has a metallic look. The sticker on the left arm doesn’t even fit the piece and this can be seen on their promo pics, too :D No prints except for the moulded head. Thankfully, the painted pieces look good without any stickers at all, so you can just throw them away, thus I won’t deduce many points for it, 7/10.
Instructions: oversized book an looks cheap. However, it was perfectly clear, I liked the unusual way of the building it describes and didn’t encounter any problem. 8/10.
To conclude, 28/40, I can’t really recommend it because of the quality, but as a display model, it’s good-looking enough, so you can try and see for yourself :)
----------
以下为中文翻译：
K 盒子这个品牌，我本来没打算尝试。但看到他们出了《环太平洋》机甲系列后，我还是决定入手一套。我已经有 3 款小鲁班的环太平洋机甲了，想着再多一台猎人机甲也无妨。
我选的是 2024 年款的暴风赤红（10311），因为我很喜欢它造型独特的腿部和三条手臂设计。我本身就偏爱设计有特色、不千篇一律的机甲（可惜我当时不知道他们 2026 年会出切尔诺阿尔法，不然肯定会买那款）。
我在 AE 的 ATONG 积木店下单，用了优惠券后实付 17.15 欧元，13 天寄到欧洲。官方标注 698 块零件，我估计是把备用件也算进去了 —— 备用件数量还不少，具体可以看图。不过这家店我不推荐，说明书被他们粗暴地硬塞进包装盒里。当然说明书尺寸确实偏大，这点我也能理解。
轻松拼装大概花了 3.5 小时。拼装方式对我来说挺特别的：先拼好大大小小的独立模块，再统一组装到主体上，我个人还挺喜欢这种设计。
积木质量
零件手感比乐高甚至其他平价品牌都要轻。红色零件是在普通砖面上喷涂的，漆面很薄，不会影响咬合度，但耐磨性一般，边角处偶尔会露出底色，不过不算明显。漆面不会掉色沾手。
咬合度中规中矩，偏松一点。有一个零件变形，还缺了一块 2×4 的黑色板件，我用自己的备用件补上了。未喷涂的零件光泽度比乐高弱，但也不是完全哑光。科技件和小球关节偏松。
综合评分：6/10。不算糟糕，但整体质感偏轻，还是能明显感觉出品质偏低。
造型设计
主要适合摆件展示。奇怪的是，拿着它挥来挥去居然不会散架，明明看着很多零件都该掉下来才对😂。部分装饰件没有加固结构。右臂用的是小球关节，设计很不合理，手臂太重，根本没法用三条手臂摆出帅气造型。腿部结构也限制了可动性。
为了稳定加了很多限位件，一动就容易掉。大球关节又太紧，虽然利于站立，但搭配限位件后可动性很差。成品整体颜值在线，还附带两个头部可选：一个一体成型头，一个拼装头。我选了拼装头，因为零件统一，颜色更精准。另外， torso（躯干）可以自由旋转，这点我不太喜欢。
综合评分：7/10。
贴纸 / 印刷
一共只有 10 张贴纸，按理说应该很省心，实则不然。大部分贴纸需要跨多块砖粘贴。腿部有两张我干脆没贴，视觉效果提升不大，还得跨 4 块砖。贴纸是透明亮面的，贴在金属质感的喷漆面上效果很差。左臂的贴纸甚至尺寸都不对，官方宣传图里都能看出来😂。
除了一体头外没有印刷件。好在喷漆零件本身效果不错，不贴贴纸也好看，所以这点扣分不多。
综合评分：7/10。
说明书
开本超大，质感廉价，但步骤清晰易懂。我很喜欢它介绍的独特拼装方式，全程没有遇到任何问题。
综合评分：8/10。
总结
总分 28/40。
受限于零件品质，我不太推荐入手。但如果只是当摆件，颜值还算在线，你可以自己斟酌试试。
I chose Crimson Typhoon (10311) from 2024 release because I liked its unusual shaped legs and 3 arms. I actually like mechas with some unusual details, i.e. not standard looking (too bad I didn’t know about their 2026 release, I’d buy Cherno Alpha then!).
Ordered at AE ATONG BUILDING BLOCKS Store for 17.15 EU (sale coupon), 13 days to the EU. It suppose to have 698 pieces, but I guess they also counted all the spares (and there are many, see pictures). I wouldn’t recommend the store though – they squeezed in the instructions to the package in a really barbaric way. On the other hand, the instructions are really oversized, so I kinda understand them.
Relaxed building took about 3.5 hours. The building process was quite unusual for me, where you build separate modules – small or big ones – and then attach them to the main construction. I liked it though.
Brick quality: pieces seemed lighter than from Lego or other, even cheaper brands. The red colour is painted over usual pieces. The painting is thin, which prevents it from affecting the clutch but also makes less resistant – you can see original colours here and there on the corners and edges. Nothing too visible, though. Paint doesn’t leave any traces on your fingers. The clutch power is good enough, on the verge of being loose. One piece was malformed and another one (black plate 2*4) was missing – I took analogues from my spares. The pieces that are not painted are less glossy than Lego, but not still not completely matte. Technic pieces and small ball-joints are a bit too loose. 6/10 and though not terrible, the pieces do leave an impression of some lower quality products, mainly because of that “light” feeling.
Design: mainly a display piece. Weirdly enough, it doesn’t fall apart when “wooshing” around, despite it looks like some pieces definitely should fall off :D Some decorations are not enforced by anything. Right arms uses small ball-joints, bad decision, as they are too heavy, so you can’t take advantage of 3 arms for cool poses. Posing is also limited by the legs construction. Many limiters are used for stability that will fall off if you try moving them too much. Ball joints (the big ones) are too tight to move, which of course good for stability, but bad for posing considering the aforementioned limiters. The end model still looks great and they even included 2 heads for you to choose from – one moulded and one for you to assemble. I chose the assembled one just because it uses the same pieces and thus its colour is perfectly accurate. Also, I am not sure if I like the freely rotating torso. 7/10.
Stickers/prints: just 10 stickers that should be a win in my book, but no. Most of them are meant to be applied on several pieces. I didn’t even use 2 of them on the legs, as they are not adding much visually but are applied across 4 pieces each. Stickers are transparent and glossy, which doesn’t look good on a painted surface that has a metallic look. The sticker on the left arm doesn’t even fit the piece and this can be seen on their promo pics, too :D No prints except for the moulded head. Thankfully, the painted pieces look good without any stickers at all, so you can just throw them away, thus I won’t deduce many points for it, 7/10.
Instructions: oversized book an looks cheap. However, it was perfectly clear, I liked the unusual way of the building it describes and didn’t encounter any problem. 8/10.
To conclude, 28/40, I can’t really recommend it because of the quality, but as a display model, it’s good-looking enough, so you can try and see for yourself :)
----------
以下为中文翻译：
K 盒子这个品牌，我本来没打算尝试。但看到他们出了《环太平洋》机甲系列后，我还是决定入手一套。我已经有 3 款小鲁班的环太平洋机甲了，想着再多一台猎人机甲也无妨。
我选的是 2024 年款的暴风赤红（10311），因为我很喜欢它造型独特的腿部和三条手臂设计。我本身就偏爱设计有特色、不千篇一律的机甲（可惜我当时不知道他们 2026 年会出切尔诺阿尔法，不然肯定会买那款）。
我在 AE 的 ATONG 积木店下单，用了优惠券后实付 17.15 欧元，13 天寄到欧洲。官方标注 698 块零件，我估计是把备用件也算进去了 —— 备用件数量还不少，具体可以看图。不过这家店我不推荐，说明书被他们粗暴地硬塞进包装盒里。当然说明书尺寸确实偏大，这点我也能理解。
轻松拼装大概花了 3.5 小时。拼装方式对我来说挺特别的：先拼好大大小小的独立模块，再统一组装到主体上，我个人还挺喜欢这种设计。
积木质量
零件手感比乐高甚至其他平价品牌都要轻。红色零件是在普通砖面上喷涂的，漆面很薄，不会影响咬合度，但耐磨性一般，边角处偶尔会露出底色，不过不算明显。漆面不会掉色沾手。
咬合度中规中矩，偏松一点。有一个零件变形，还缺了一块 2×4 的黑色板件，我用自己的备用件补上了。未喷涂的零件光泽度比乐高弱，但也不是完全哑光。科技件和小球关节偏松。
综合评分：6/10。不算糟糕，但整体质感偏轻，还是能明显感觉出品质偏低。
造型设计
主要适合摆件展示。奇怪的是，拿着它挥来挥去居然不会散架，明明看着很多零件都该掉下来才对😂。部分装饰件没有加固结构。右臂用的是小球关节，设计很不合理，手臂太重，根本没法用三条手臂摆出帅气造型。腿部结构也限制了可动性。
为了稳定加了很多限位件，一动就容易掉。大球关节又太紧，虽然利于站立，但搭配限位件后可动性很差。成品整体颜值在线，还附带两个头部可选：一个一体成型头，一个拼装头。我选了拼装头，因为零件统一，颜色更精准。另外， torso（躯干）可以自由旋转，这点我不太喜欢。
综合评分：7/10。
贴纸 / 印刷
一共只有 10 张贴纸，按理说应该很省心，实则不然。大部分贴纸需要跨多块砖粘贴。腿部有两张我干脆没贴，视觉效果提升不大，还得跨 4 块砖。贴纸是透明亮面的，贴在金属质感的喷漆面上效果很差。左臂的贴纸甚至尺寸都不对，官方宣传图里都能看出来😂。
除了一体头外没有印刷件。好在喷漆零件本身效果不错，不贴贴纸也好看，所以这点扣分不多。
综合评分：7/10。
说明书
开本超大，质感廉价，但步骤清晰易懂。我很喜欢它介绍的独特拼装方式，全程没有遇到任何问题。
综合评分：8/10。
总结
总分 28/40。
受限于零件品质，我不太推荐入手。但如果只是当摆件，颜值还算在线，你可以自己斟酌试试。
